3Com 9100 User Manual page 39

Table 9 Common Commands (continued)
Command
enable idletimeout
enable telnet {access-profile
<access_profile> | none} {port
<tcp_port_number>}
enable web {access-profile
<access_profile> | none} {port
<tcp_port_number>}
history
clear session <number>
disable bootp vlan [<name> | all]
disable cli-config-logging
disable clipaging
disable idletimeout
disable telnet
disable web
delete account <username>
delete vlan <name>
(continued)
Description
Enables a timer that disconnects all sessions
(both Telnet and console) after 20 minutes of
inactivity. The default setting is disabled.
Enables Telnet access to the switch. By
default, Telnet is enabled with no access
profile, and uses TCP port 23. The none
option removes any previously configured
access profile assignment.
Enables web access to the switch. By default,
web access is enabled with no access profile,
using TCP port number 80. You must reboot
the switch before this command takes effect.
The none option removes any previously
configured access profile assignment.
Displays the previous 49 commands entered
on the switch.
Terminates a Telnet session from the switch.
Disables BOOTP for one or more VLANs.
Disables logging CLI configuration
commands to the syslog for auditing
purposes.
Disables pausing at the end of each CLI
screen.
Disables the timer that disconnects all
sessions. Once disabled, console sessions
remain open until the switch is rebooted or
you logoff. Telnet sessions remain open until
you close the Telnet client.
Disables Telnet access to the switch.
Disables Web access to the switch.
Deletes a user account.
Deletes a VLAN.
Common Commands 39