The Switch - 3Com 9100 User Manual

112 C 8: S
HAPTER TATUS
Table 30 Status Monitoring Commands
Command
show log {<priority>}
show log config
show memory
show switch
show version
M S
ONITORING AND TATISTICS
Table 30 describes

the switch.

Description
Displays the current snapshot of the log. The priority
option filters the log to display message with the selected
priority or higher (more critical). Priorities include critical,
emergency, alert, error, warning, notice, info, and
debug. If not specified, informational priority messages
and higher are displayed.
Displays the log configuration, including the syslog host
IP address, the priority level of messages being logged
locally, and the priority level of messages being sent to
the syslog host.
Displays the current system memory information.
Displays the current switch information, including:
sysName, sysLocation, sysContact
MAC address
Current time and time, and system uptime
Operating environment (temperature, fans, and
power supply status)
NVRAM image information (primary/secondary image,
date, time, size, version)
NVRAM configuration information (primary/secondary
configuration, date, time, size, version)
Scheduled reboot information
802.1p information
System serial number and reworks indicator
Software platform
System ID
Power supply and fan status
Displays the hardware and software versions currently
running on the switch. Displays the switch serial number.
commands that are used to monitor the status of
show