3Com 9100 User Manual page 24

24 C 1: S
HAPTER WITCH
9100 O
VERVIEW
Table 5 Switch 9100 Factory Defaults (continued)
Item
Spanning Tree Protocol
802.1p priority
802.3x flow control
802.1Q tagging
Forwarding database aging
period
IGMP
IGMP snooping
Port status
SNMP read community string
SNMP write community string
RMON history session
RMON alarms
BOOTP
Default Setting
Disabled for the switch; enabled for each port in
the STPD
Recognition enabled
Enabled on Gigabit Ethernet ports
All packets are untagged on the default VLAN
( default)
300 seconds (5 minutes)
Enabled
Enabled
Enabled on all ports
public
private
Enabled
Enabled
Send trap if load is greater than 75% of available
bandwidth
Send trap if there are more than 10 errors in
1,000 packets
Enabled on the default VLAN ( default )