Leds - 3Com 9100 User Manual

Table 3 Media Types and Distances
Standard
100BASE-TX
1000BASE-T
1000BASE-SX (850 nm)
Table 4 Switch 9100 LEDs
LED
1000BASE-SX Port Status LEDs
Link/activity
(continued)
WARNHINWEIS: RJ-45 Ports. RJ-45-Anschlüsse. Dies sind
abgeschirmte RJ-45-Datenbuchsen. Sie können nicht als
Telefonanschlußbuchsen verwendet werden. An diesen Buchsen dürfen
nur RJ-45-Datenstecker angeschlossen werden.
Diese Datenstecker können entweder mit abgeschirmten oder
unabgeschirmten Datenkabeln mit abgeschirmten oder unabgeschirmten
Klinkensteckern verbunden werden.
The Switch 9100 has six autosensing 100/1000BASE-TX ports using
standard RJ-45 connectors. It also has two 1000BASE-SX ports that use
standard MT-RJ connectors.
The Switch 9100 ports support the media types and distances listed in
Table 3.
Media Type
Category 5 UTP Cable (100Mbps)
Category 5 UTP Cable (1000Mbps)
62.5/125 µm Multimode fiber
62.5/125 µm Multimode fiber
50/125 µm Multimode fiber
50/125 µm Multimode fiber
For more information on 1000BASE-SX characteristics refer to IEEE Draft
P802.3z/D4.2 Tables 38-2 and 38-6.

LEDs

Table 4 describes the LED behavior on the Switch 9100.
Color
Green
Yellow
Green flashing
Off
Switch 9100 Front View
Mhz/Km Rating
160
200
400
500
Indicates
Link is present; port is enabled.
Frames are being transmitted/received on this
port.
Link is present; port is disabled.
Link is not present.
(continued)
21
Maximum Distance
100 m
100 m
220 m
275 m
500 m
550 m