3Com 9100 User Manual page 38

38 C 3: A
HAPTER CCESSING THE
Table 9 Common Commands (continued)
Command
create vlan <name>
config account <username> {encrypted}
{<password>}
config banner
config time <date> <time>
config timezone <gmt_offset> {autodst |
noautodst}
config vlan <name> ipaddress
<ip_address> {<mask>}
disable autodst
enable autodst
enable bootp vlan [<name> | all]
enable cli-config-logging
enable clipaging
(continued)
S
WITCH
Description
Creates a VLAN.
Configures a user account password.
Passwords must have a minimum of four
characters and can have a maximum of 12
characters. User names and passwords are
case-sensitive.
Configures the banner string. You can enter
up to 24 rows of 80-column text that is
displayed before the login prompt of each
session. Press [Return] at the beginning of a
line to terminate the command and apply the
banner. To clear the banner, press [Return] at
the beginning of the first line.
Configures the system date and time. The
format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You
cannot set the year past 2023.
Configures the time zone information to the
configured offset from GMT time. The format
of gmt_offset is +/- minutes from GMT
time. Specify:
The default setting is autodst.
Configures an IP address and subnet mask
for a VLAN.
Disables automatic Daylight Savings Time
change.
Enables automatic Daylight Savings Time
change.
Enables BOOTP for one or more VLANs.
Enables logging CLI configuration commands
to the syslog for auditing purposes.
Enables pausing at the end of each CLI
screen, allowing you to use a scripting
language to get switch status.
autodst — Enables automatic Daylight
Savings Time change.
nosautodst — Disables automatic
Daylight Savings Time change.