Paradox K35 Quick Start

Quick Start
K35 Keypad
Zone Display:
The numbers [1] to [32]
correspond to zones 1 to 32
respectively. Open or entry
delay zones are illuminated,
and flash in alarm.
Quick Menu Programming
(press once + [MASTER
CODE])
AC Light (ON* = power ON
OFF = power OFF)
StayD Light (ON* = StayD ON
OFF = StayD OFF)
* Icon shown on screen

How To Arm

Arming When Exiting (Regular Arm)
To arm your system when exiting:
Step Description
1. Close all zones in the desired partition.
2. Enter your [ACCESS CODE]‡ or [ARM] +
[ACCESS CODE].

How To Disarm

To disarm your system when entering:
Step Description
1. Press [OFF] and enter your [ACCESS
CODE]‡.
‡
If needed, press button(s) corresponding to desired partition(s). For two partitions, press the other key after the confirmation beep.
K35-EQ02
Printed in Canada - 09/2019
Partition Status
Zone
Status

Arming When Staying (Stay / Sleep Arm)

To arm your system when staying:
Arm / Sleep / Stay:
On
Off
Flash
Fast Flash† = Exit Delay (final
Fast Flash† = Partition in alarm
[TBL] Trouble display
On = Trouble(s) occurring
[MEM] Alarm memory display
On = Alarm(s) occurred
[BYP] Bypass programming
On = Zone(s) bypassed
†Audible Indicators
Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep = Beginning of
exit delay
Fast beep = Final 10 sec. of
exit delay
Step Description
1. Press [STAY] for stay arming or [SLEEP] for
sleep arming and then enter your [ACCESS
CODE]‡.
= Partition armed
= Partition disarmed
= Exit Delay
10 sec.)
:
PARADOX.COM