Assigning User-Defined Clip Titles - Sony PDW-F1600 Operation Manual

• Deletion and renaming of directories
Notes
• The maximum number of files that can be created on a
disc is 5,000 for single-layer discs and 6,000 for dual-
layer discs (both including directories).
• File names and directory names can use letters, numbers,
and symbols from the Unicode 2.0 (UTF-8) character
set.
However, the following control characters and
1)
symbols cannot be used.
- Control characters: U+0000 to U+001F, U+007F
- Symbols: ", *, /, :, <, >, ?, \, |
1) The following character codes cannot be used by FAM connections.
U+010000, U+020000, U+030000, U+040000, U+050000, U+060000,
U+070000, U+080000, U+090000, U+0A0000, U+0B0000, U+0C0000,
U+0D0000, U+0E0000, U+0F0000, U+100000
PROAV directory
This directory contains individual files recorded on the
disc.
To display the PROAV directory, set maintenance menu
item M33: FILE I/F CONFIG > PROAV DISPLAY to
"ENABLE".

Assigning user-defined clip titles

By default, clips on each disc are assigned names in the
range C0001.MXF to C9999.MXF. For this reason, two
discs can contain clips with the same names. The
automatic title generation function allows you to assign
titles to all of the clips on several discs, which facilitates
clip management. For example, if the titles TITLE00001 to
TITLE00020 are assigned to clips C0001.MXF to
C0020.MXF on disc 1, then the titles TITLE00021 to
TITLE00037 are assigned to clips C0001.MXF to
C0017.MXF on disc 2.
110
Overview
C0002.MXF
C0001.MXF
TITLE00002
TITLE00001
Clips recorded on Disc 1
C0002.MXF
C0001.MXF
TITLE00022
TITLE00021
Clips recorded on Disc 2
Proceed as follows to specify a title and assign it to
recorded clips.
1
Press the MENU button.
2
Turn the PUSH SET(S.SEL) knob to select setup
menu item 035, and press the knob.
3
Turn the PUSH SET(S.SEL) knob to select "on", and
press the knob.
The clip title naming screen appears.
RETURN
ITE M- 035
SELECT
CLI P T IT LE NAM IN G
*T IT LE
P RE FIX
SAVE N UM ERI C
EXIT
SETUP
4
Turn the PUSH SET(S.SEL) knob to move the asterisk
(*) on the left of the menu items to "TITLE", and press
the knob.
The asterisk indicates the selected item.
5
Turn the PUSH SET(S.SEL) knob to select "enable",
and press the knob.
The automatic title generation function is enabled.
C0020.MXF
TITLE00020
C0017.MXF
TITLE00037
SE LE CT
- di sab le
- TI TLE
- 00 001