Sony PDW-F1600 Operation Manual page 134

Item number Item name
258 LIVE LOGGING MODE
a) HD1500 When the PDBK-S1500 or PDBK-F1500 option is installed.
b) When the PDBK-201 option board is installed
c) FTP connections can be made only when the device connected to the
REMOTE(9P) connector (D-sub 9 pin) is in stop mode. During FTP
Item number Item name
301 VAR SPEED RANGE FOR
SYNCHRONIZATION
311 [F1600]
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH1
[F1600]
312
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH2
313 [F1600]
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH3
[F1600]
314
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH4
[F1600]
317
AUDIO EDIT MODE
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
134
Setup Menu
Menu items in the 200s, relating to the remote control interface
Settings
Specify the Live Logging operation mode.
off: Disable the Live Logging function.
live mode: Select Live mode. Supported operations are metadata
editing only.
live view mode: Select Live View mode. Supported operations are proxy
AV data streaming and metadata editing.
Notes
• In Live View mode, the run mode is always Free Run, regardless of the
setting of RUN MODE on page P5 TC of the function menu. It is not
possible to preset the timecode to be recorded.
• The Disc Exchange Cache function and Clip Continuous Rec function
cannot be enabled in Live View mode.
• FAM or FTP connections cannot be established during a Live View
mode connection. Live view mode connections cannot be established
during a FAM or FTP connection.
Menu items in the 300s, relating to editing operations
Settings
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE(9P)
connector.
–2~+2: –2 to +2 times normal speed.
wide: –2.20 to +2.20 times normal speed.
Select methods for setting the edit presets of the digital audio channels
CH1 to CH4 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef (no definition): No definition
ch 1 (analog ch1): Follow the edit preset of analog channel 1.
ch 2 (analog ch2): Follow the edit preset of analog channel 2.
ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or
2.
(The default settings for each item are as follows)
311: ch 1 (analog ch1)
312: ch 2 (analog ch2)
313: nodef (no definition)
314: nodef (no definition)
Select the type of audio transition used for linear editing.
cut edit: Cut editing (audio discontinuity at transition point, and possible
noise during playback).
cross fade: Cross-fade
Specify the handling of audio at edit points and at the second and
subsequent recording start points in Clip Continuous Rec recording.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade: Fade out and fade in.
connections, the device connected to the REMOTE(9P) connector cannot
be used to control this unit.