Sony PDW-F1600 Operation Manual page 149

Item
M38: F-KEY For details, refer to the Maintenance Manual.
CONFIG
M380: HOME2
M381: PAGE8 ASSIGN
M382: PAGE8 NAME
M38F: NV-RAM
CONTROL
M39: OTHER M390: MIXED REC
CONFIG
M391: VITC REC
M392: PB POS
M393: AUDIO DSP
M394: HD L.EDIT
M3: OTHERS: Other setting items
Setting
Assign a function menu item to page HOME2 of the function menu as a user
setting.
Assign a setup menu item to page P8 of the function menu as a user setting.
Specify the name of a setup menu item assigned with M381: PAGE8 ASSIGN.
Save the settings of M380 to M382.
Select whether to enable mixed format recording mode.
DISABLE: Do not enable.
ENABLE: Enable.
Select whether to record the VITC in the input HDSDI signals in the LTC user bits
area.
DIS: Do not record.
ENA: Record.
When you switch between the clip playback screen and the clip list playback
screen, specifies the clip or sub clip playback start position.
KEEP: Play from the position where playback stopped.
FORCED TOP: Play from the first frame of the first clip or sub clip.
Select the function for which the audio digital signal processor shall be used.
linear edit: Use for linear editing (microphone input is disabled).
AGC/limiter: Use for microphone input (linear editing is disabled).
Note
It is not possible to use the audio digital signal processor for multiple functions at
the same time.
a) Specify the linear editing mode.
Standard: Software version 1.51 compatible editing mode (standard mode)
Extra: Editing mode that supports normal HD422 clips (extra mode)
Notes
• Clips edited in extra mode cannot be edited on XDCAM devices with software
versions earlier than 1.51, or on this unit when this unit is set to standard mode.
• If you want to use extra mode, select extra mode on every PDW-F1600/HD1500
that you connect to the editing system.
a)
149
Maintenance Menu