Sony PDW-F1600 Operation Manual page 164

Alarm message in time
data display area
Run Salvage
a)
CNT mode!
b)
TC EXT!
a)
REGEN mode!
a)
REC RUN!
b)
REC mode!
REC-PAUSE!
Disc Exchg!
b)
No SEL List
b)
SB CLP mode
b)
SUB CLIP NG
b)
No List!
164
Troubleshooting
Alarm message in video monitor screen Description/action
EXECUTE SALVAGE PROGRAM.
COUNTER MODE IS SELECTED.
SET COUNTER SELECT MENU TO TC
OR UB.
TC EXTERNAL IS SELECTED.
SET TC INTERNAL MODE IN FUNCTION
MENU.
TCG REGEN MODE IS SELECTED.
SET TC PRESET MODE IN FUNCTION
MENU.
TCG RUN MODE IS SET TO REC RUN.
SET TC FREE RUN MODE IN FUNCTION
MENU.
THUMBNAIL(S) CANNOT BE
DISPLAYED DURING RECORDING.
CANNOT EXECUTE IN REC MODE.
DRIVE MAINTENANCE MENU CANNOT
BE EXECUTED WHILE IN REC MODE.
INPUT SELECTION CANNOT BE
CHANGED DURING RECORDING.
AUDIO REC MODE CANNOT BE
CHANGED DURING RECORDING.
TC/UB CANNOT BE PRESET IN REC-
PAUSE MODE.
EXIT DISC EXCHANGE CACHE MODE.
CLIP LIST IS NOT SELECTED.
TO ADD AN ESSENCE MARK, EXIT
FROM SUB CLIP MODE FIRST.
SUB CLIP IS INVALID.
SET APPROPRIATE IN/OUT POINTS.
NO CLIP LIST.
This appears when recording, E-E display, essence
mark recording, or sub clip addition for quick scene
selection is attempted on a disc that needs to be
salvaged.
Try again after salvaging the clips on the disc (see
page 58).
This appears when CNTR SEL on the HOME page of
the function menu is set to "COUNTER", and you try
to preset timecode or user bits.
To use timecode or user bits, set CNTR SEL to "TC"
or "UB" (see page 48).
This appears when TCG on page P5 TC of the
function menu is set to "EXT", and you try to preset
timecode or user bits by setting PRST/RGN to
"PRESET".
Set TCG to "INT" (see page 51).
This appears when PRST/RGN on page P5 TC of the
function menu is set to "TC" or "VITC", and you try to
preset timecode or user bits.
Set PRST/RGN to "PRESET" (see page 51).
This appears when RUN MODE on page P5 TC of
the function menu is set to "REC RUN", and you try to
preset timecode or user bits.
Set RUN MODE to "FREE RUN" (see page 51).
Stop recording and try again.
Stop recording and try again.
This appears when you perform one of the following
operations.
• Attempt to preset timecode or user bits.
• Attempt to make a FAM connection.
• Press the button such as PLAY button while the
disc is being ejected during disc exchange.
This appears when you press the SUB CLIP/
DISC MENU button while the clip list on the disc is
not loaded into the current clip list.
Load the clip list (see page 88) and try again.
This appears when an attempt is made to manipulate
the essence mark while the SUB CLIP/DISC MENU
indicator is lit or to set a clip flag while the clip list is
being played back (SUB CLIP indicator is lit). Perform
the operation after pressing the SUB CLIP/DISC
MENU button to turn it off.
Set the In and Out points again.
This appears when you try to delete a clip list when
there is no clip list saved on the disc.
Load the disc that contains the clip list you want to
delete.