Sony PDW-F1600 Operation Manual page 168

Alarm message in time data
display section
a)
MEM. Empty!
Disc Error!
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on" or "limit".
During thumbnail search, scene selection, and clip list operations
Alarm message in GUI
screen
Cannot Expand Clip any
Further.
Selected Essence Mark does
not Exist.
Sub Clip is Invalid.
Set Appropriate IN/OUT
Points.
Duration of One Clip List
must be Less than 24 Hours.
No More Sub Clips can be
Added to the Clip List.
Sub Clip does not Exist.
Clip List does not Exist.
Move is Invalid.
Chapter does not Exist.
Some Essence Mark cannot
be Deleted.
Some Essence Mark cannot
be Moved.
Clip is Locked.
All Clips are Locked.
All Clips are Unlocked.
Command Disabled.
168
Troubleshooting
Alarm message in monitor video
section
MEMORY EMPTY !!
DISC ERROR DETECTED.
Description/action
The clip cannot be expanded into more blocks.
This appears when the EXPAND button is pressed when the number of block is maximum, or
when the duration of an expanded thumbnail is 1 frame.
The selected essence mark does not exist.
This appears in the essence mark selection screen when the specified essence mark does not
exist on the disc.
The temporal relationship between the specified In and Out points in sub clip trimming is not
correct.
Reset so that the value of the Out point timecode is larger than the value of the In point
timecode.
The total duration of the current clip list is greater than 24 hours.
This appears when the total duration of the current clip list exceeds the upper limit of 24 hours as
the result of adding or trimming sub clips.
The upper limit of sub clips in the current clip list has been reached.
This appears when the upper limit of 300 clips in a clip list has been reached as the result of
adding or trimming sub clips.
There are no sub clips in the current clip list.
This appears when an attempt is made to move, trim or delete sub clips or preset timecode.
There are no clip lists on the disc.
This appears when an attempt is made to execute a Delete Clip List operation when there are no
clip lists on the disc.
The sub clip cannot be moved.
This appear when an attempt is made to execute a Move Sub Clips operation when there are no
sub clip in the current clip list, or when there is only one sub clip.
The specified chapter has not been recorded.
This appears when an attempt is made to display a chapter when a chapter has not been
recorded for that clip.
The essence mark cannot be deleted.
This appears when an attempt is made to delete an essence mark that cannot be deleted with a
Delete Essence Mark operation. Rec Start and Cut essence marks cannot be deleted.
The essence mark cannot be moved.
This appears when an attempt is made to move an essence mark that cannot be moved with a
Move Essence Mark operation. Rec Start and Cut essence marks cannot be moved.
The clip is locked.
This appears when an attempt is made to delete a clip, set the clip thumbnail, or delete a shot
mark when the clip is locked.
All clips are locked.
This appears when an attempt is made to execute a Lock All Clips operation when all clips are
already locked.
All clips are unlocked.
This appears when an attempt is made to execute an Unlock All Clips operation when all clips
are already unlocked.
This appears when an attempt is made to perform Format Disc operation while Setting Format
Disc is set to "Disable".
Description/action
Check the disc being played by this unit.
Use another disc.