Sony PDW-F1600 Operation Manual page 166

Alarm message in time
data display area
Mixed REC!
b)
Mixed REC!
Resolution
b)
i.LINK!
b)
SD Input!
b)
NON-AUDIO!
List Exists
b)
N/A Clip!
b)
Mode Err!
b)
N/A Disc!
Live Logg!
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on".
b) Displayed only when setup menu item 016 ALARM DISPLAY is set to
"on" or "limit".
166
Troubleshooting
Alarm message in video monitor screen Description/action
THIS DISC CANNOT BE RECORDED.
TWO OR MORE AUDIO OR VIDEO
FORMATS ARE RECORDED ON THE
DISC.
DISC CANNOT BE EDITED.
MIXED AUDIO/VIDEO MODE ON DISC.
THIS CLIP CANNOT BE ADDED.
THE CLIP'S RESOLUTION DOES NOT
MATCH THE CLIP LIST'S RESOLUTION.
CANNOT EDIT AV MATERIAL WHEN
INPUT SIGNAL IS VIA i.LINK.
CANNOT EDIT AV MATERIAL WHEN
INPUT SIGNAL IS VIA SD-SDI.
AUDIO INSERT EDITING WITH
INDEPENDENT CHANNELS IS NOT
POSSIBLE.
CHANGE 'NON-AUDIO INPUT' IN
MAINTENANCE MENU FROM 'DATA' TO
'AUDIO'.
DISC CANNOT BE EDITED.
DELETE ALL CLIP LIST BEFORE
BEGINNING DESTRUCTIVE EDITING.
CANNOT EDIT AV MATERIAL.
CHECK REC FORMAT IN CLIP.
CANNOT EDIT AV MATERIAL.
CHANGE 'SNGL CLIP PB' TO 'OFF' AND
'REC MODE' TO 'NORMAL' IN SETUP
MENU.
DISC CANNOT BE EDITED.
USE PFD23A OR PFD50DLA.
EXIT LIVE VIEW MODE OF LIVE
LOGGING.
This appears if a disc containing clips recorded in
different recording formats is inserted while mixed
format recording mode is disabled. Enable mixed
format recording mode, or insert another disc.
This appears when an edit preset command is
received, but the inserted disc contains clips with
mixed recording formats.
Exchange the inserted disc for a disc that does not
contain clips with mixed recording formats.
Clips can be registered in clip lists only if their
resolution (number of system lines) matches the
resolution of clips in the clip list.
This appears when an edit preset command is
received, but "i.LINK" is selected as the input signal.
Under V INPUT on the P1 VIDEO page of the
function menu, select a signal other than "i.LINK".
This appears when an edit preset command is
received, but the recording format is set to HD422
and "SDSDI" is selected as the video input signal.
Under V INPUT on the P1 VIDEO page of the
function menu, select "HDSDI".
This appears when digital audio signals are set to
"data" and an edit preset command is received for
individual channels in the audio input channel pairs
(CH1/2, CH3/4, CH5/6, CH7/8). To perform insert
editing of non-audio signals, always operate on
channel pairs.
If you want to perform insert editing of the audio of
individual channels from channel pairs, set
maintenance menu item M37: AUDIO CONFIG
>M372: NON-AUDIO INPUT to "audio".
This appears when an edit preset command is
received but the inserted disc contains a clip list.
Exchange the disc for one that does not contain a clip
list, or delete all clip lists from the disc.
This appears when an edit preset command is
received for an HD420 clip or another clip that cannot
be edited.
Check the recording format of the edit target clip (see
page 60).
This appears when an edit preset command is
received but the unit is in Single Clip Playback mode,
Disc Exchange Cache mode, or Clip Continuous Rec
mode.
Set setup menu item 154 SINGLE CLIP PLAY MODE
to "off", or set setup menu item 150 REC MODE to
"normal".
This appears when an edit preset command is
received, but linear editing is not possible for the
inserted disc.
Insert a disc that can be edited by linear editing (see
page 60).
This appears when an attempt is made to preset
timecode or establish a FAM or FTP connection while
the Live Logging function is set to Live View mode.