Sony PDW-F1600 Operation Manual page 165

Alarm message in time Alarm message in video monitor screen Description/action
data display area
Loading List! LOADING CLIP LIST.
b) STOP ONCE, THEN EXECUTE.
STOP ONCE!
No EM space ESSENCE MARK NOT RECORDED.
NO SPACE AVAILABLE TO RECORD
ESSENCE MARK.
EM Full! NO MORE ESSENCE MARKS CAN BE
RECORDED.
Disc Damage DISC CANNOT BE RECORDED TO.
USE ANOTHER DISC FOR RECORDING.
NON-AV Full DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING SPACE,
DELETE NON-AV DATA. (GENERAL
FILES)
Index File! UNSUPPORT INDEX FILE.
DISC CANNOT BE RECORDED TO.
File System CURRENT VERSION OF THE
SOFTWARE SETS THE DISC WRITE
PROTECTED.
FILE SYSTEM ON THE DISC INHIBITS
WRITING.
a) LOADING.
Loading!
a) UNLOADING.
Unloading!
Clip lock! CLIP IS LOCKED.
UNLOCK CLIP IN THUMBNAIL MENU.
File Access CANNOT CHANGE SETTINGS DURING
FILE ACCESS.
Inhibit! PC REMOTE IS DISABLED.
CHECK MAINTENANCE MENU M33.
PC REMOTE IS DISABLED.
CHECK SETUP MENU 215.
GUI Inhibit GUI OPERATION IS INHIBITED.
CHECK SETUP MENU.
This appears if the SUB CLIP/DISC MENU button is
pressed while a clip list is loading.Wait for the clip list
to finish loading and try again.
This appears when the SUB CLIP/DISC MENU
button is pressed while the clip list is being played
back or when an attempt is made to open the GUI
screen with setup menu item 151 GUI OPERATION
set to "stop". Perform the operation after stopping
playback.
Use the PDZ-1 Proxy Browsing Software to delete
unneeded essence marks.
Or, delete unneeded shot marks in the chapter
thumbnail screen.
Use another disc.
Delete unneeded GENERAL files.
Use another disc.
This appears when you insert a disc that can be
played back but not recorded.
Exchange the disc for one with a file system
supported by this unit. Or format the disc (see
page 96).
This appears if you press a button while a disc is
loading. Wait until the disc has finished loading and
try again.
This appears if you press a button while a disc is
unloading.
Wait until the disc has finished unloading and try
again.
This appears when an operation is attempted on a
locked clip, or when an edit preset command is
received for such a clip. Use the Thumbnail Menu to
unlock the clip (see page 85) and try again.
This appears when an attempt is made to change the
setting of PC RMT (ENABLE/DISABLE) on page P7
OTHER of the function menu while accessing a file or
processing the command with PC REMOTE.
This appears when an attempt is made to change the
setting of PC RMT (ENABLE/DISABLE) on page P7
OTHER of the function menu while maintenance
menu item M33: FILE I/F CONFIG >PC REMOTE is
set to "ENABLE".
This appears when an attempt is made to change the
setting of PC RMT (ENABLE/DISABLE) on page P7
OTHER of the function menu while setup menu item
215 i.LINK mode is set to the value other than "FAM".
This appears when the THUMBNAIL button or the
DISC MENU (SHIFT+SUB CLIP) button is pressed
while setup menu item 151 GUI OPERATION is set to
"dis".
165
Troubleshooting