Sony PDW-F1600 Operation Manual page 143

Item number Item name
834 AUDIO INPUT LEVEL
Sub-item
1 CH1
2 CH2
839 AUDIO AGC/LIMITER MODE
840 AUDIO AGC SELECT
841 AUDIO LIMITER SELECT
a) HD1500 When the PDBZ-UPG02 Software Upgrade Key is installed.
Item number Item name
920 SD-SDI H-ANC CONTROL
Sub-item
1 AUDIO 5CH-8CH
2 RP188 ATC
Menu items in the 800s, relating to audio control
Settings
Select the analog audio input source.
Note
To display this item on the PDW-F1600 or PDW-HD1500 with the PDBZ-
UPG02 Software Upgrade Key installed, set maintenance menu item
M393: AUDIO DSP to "AGC/limiter". When maintenance menu item
M393: AUDIO DSP is set to "linear edit", this item is not displayed.
line: Line input
mic: Microphone input
line: Line input
mic: Microphone input
For automatic input level adjustments performed on the analog audio
signals recorded on channels 1 and 2, select whether to perform the
adjustments in stereo mode or independently for channels 1 and 2.
mono: Perform automatic adjustments independently for channels 1 and
2.
stereo: Perform automatic adjustments in stereo mode.
Note
To display this item on the PDW-F1600 or PDW-HD1500 with the PDBZ-
UPG02 Software Upgrade Key installed, set maintenance menu item
M393: AUDIO DSP to "AGC/limiter". When maintenance menu item
M393: AUDIO DSP is set to "linear edit", this item is not displayed.
Set the AGC saturation level.
off: AGC does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: AGC operates when the
VARIABLE switch is set to PRESET.
Notes
• To display this item on the PDW-F1600 or PDW-HD1500 with the
PDBZ-UPG02 Software Upgrade Key installed, set maintenance menu
item M393: AUDIO DSP to "AGC/limiter". When maintenance menu
item M393: AUDIO DSP is set to "linear edit", this item is not displayed.
• This setting is valid only for channels where "mic" is selected with
setup menu item 834 AUDIO INPUT LEVEL. Regardless of this
setting, AGC is "off" for channels where "line" is selected.
Select the limiter saturation level, for limiting large input signals, for use
in manual adjustment of audio input levels.
off: The limiter does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: The limiter operates when the
VARIABLE switch is set to PRESET.
Notes
• To display this item on the PDW-F1600 or PDW-HD1500 with the
PDBZ-UPG02 Software Upgrade Key installed, set maintenance menu
item M393: AUDIO DSP to "AGC/limiter". When maintenance menu
item M393: AUDIO DSP is set to "linear edit", this item is not displayed.
• This setting is valid only for channels where "mic" is selected with
setup menu item 834 AUDIO INPUT LEVEL. Regardless of this
setting, the limiter is "off" for channels where "line" is selected.
Menu items in the 900s, relating to digital process
Settings
Select whether to add information to the SDI output.
off: Do not add digital audio data channels 5 to 8.
on: Add digital audio data channels 5 to 8.
off: Do not add RP188 timecode data.
on: Add RP188 timecode data.
b) When the PDBK-201 option board is installed
143
Setup Menu