Sony PDW-F1600 Operation Manual page 144

Item number Item name
923
AUTO SQUEEZE
930 DOWN CONVERTER MODE (DC)
931 DOWN CONVERTER LETTER BOX
MODE (DC)
932 H CROP POSITION (DC)
934 CROSS COLOR (DC)
935 DETAIL GAIN (DC)
936 LIMITER (DC)
937 CRISP (DC)
938 LEVEL DEPEND THRESHOLD (DC) Adjust the down-converter image enhancer. Set the luminance range for
939 H DETAIL FREQUENCY (DC)
940 H/V RATIO (DC)
942 V FILTER SELECT (DC)
943 CROSS COLOR CRISP (DC)
944 LEGALIZE (DC)
950
UP CONVERTER MODE
951
H CROP POSITION (UC)
952
LETTER BOX POSITION (UC)
144
Setup Menu
Menu items in the 900s, relating to digital process
Settings
Select whether to use auto squeeze mode.
a)
off: Do not use.
on: Use.
Select the down-converter mode.
crop: Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
Select the aspect ratio of the down-converter output when menu item
930 is set to "l-box".
16:9: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the down converter output when menu item 930 is set to "crop".
–120 to 0 to 120
Adjust the down-converter cross color.
0 to 8 to 15
Adjust the down-converter image enhancer, the sharpness of edge
enhancement.
0 to 7FH
Adjust the down-converter image enhancer, the maximum detail level
added to emphasize the original signal.
0 to 20H to 3FH
Adjust the down-converter image enhancer, the threshold amplitude at
which low amplitude signals are not emphasized.
0 to FH
edge enhancement.
0 to 8 to FH
Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6MHz, 3.4MHz, 3.9MHz, 4.6MHz
Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
Set the vertical interpolation filter coefficient for down-converter output (in
1080 mode only).
1 to 3
Set the cross color crisp level for down-converter output.
0 to 4 to FH
For down converter output, selects whether to suppress signals with
levels that are lower than the pedestal level.
off: Do not suppress signals lower than the pedestal level.
on: Suppress signals lower than the pedestal level.
a) Select the up-converter mode.
EDGE CROP: Select the edge-crop mode.
LETTER BOX: Select the letter box mode.
SQUEEZE: Select the squeeze mode.
Adjust the H-crop (the horizontal position when cropping in the edge crop
a)
mode) of the up converter output when menu item 950 is set to "crop".
–120 to 0 to 120
a) When menu item 950 is set to "l-box", adjust the vertical location of the
position where the picture is cut out for up converter output in letter box
mode.
–120 to 0 to 120