Function Menu - Sony PDW-F1600 Operation Manual

A Input signal display: Displays the audio input signal.
.
Display Input signal
ANA-1 Analog audio
signal
ANA-2
MIC-1 Input signal from
the microphone
MIC-2
connected to
ANALOG
AUDIO INPUT
connector
AES/EBU AES/EBU format digital audio signal
(flashes when there is no input signal)
HD-SDI HDSDI audio signal (flashes when
there is no input signal)
SD-SDI SDSDI audio signal (flashes when
there is no input signal)
SG Test signal from the internal signal
generator
No indication Undefined audio signal, or no audio
input
B Data indication: Appears when the input signals are
non-audio signals.
Mixing: Displays the input channels used for
C F1600
audio mixing. (These channels are selected with setup
menu item 819 AUDIO INPUT ARRANGE.)
D Monitor channel: Displays the audio monitoring
channels set with MONITR L and MONITR R on
page P2 AUDIO of the function menu (see page 49).
E Audio channel: Displays the audio channels.
Also indicates preset or variable mode by its color
(see page 18).
White: Preset mode
Green: Variable mode
F Reference level: Displays the reference level for
recording as set in the maintenance menu.
G Level bars: Display the audio recording or playback
levels of channels 1 to 8. The OVER indicators light
when the audio level exceeds 0 dB.
H Meter display mode: Displays the audio level meter
display mode selected with AU METER on page P4
AUDIO of the function menu (see page 50).
b Function menu
Use the PAGE/HOME button to display this menu, and to
switch between the pages (HOME, P1 to P7, (P8)
1)
(HOME2) ) of the menu. Each page has three to six
setting items. Press the corresponding button to change a
setting.
1) If a menu item is assigned using maintenance menu item M38: F-KEY
CONFIG
For details, see page 48 "Basic Operations of the
Function Menu" in Chapter 3.
c Clip information
Displays clip information.
24
Front Panel
Channel 1, 3
Channel 2, 4
Channel 1, 3
Channel 2, 4
Clip names are displayed according to the setting of
Settings >Display Title in the Disc Menu (see page 74).
However, clip names are always displayed during
playback.
The following characters can be displayed as clip names in
this area.
• Digits: 0 to 9
• Alphabetic characters: a to z, A to Z
• The following symbols: !, ", #, $, %, &, ', (, ), *, +, ,
• Space
d Recording format
Displays the system frequency and the video and audio
formats.
e Time data display area
1)
,
A Remaining disc recording capacity: Displays the
B Rec Run/Free Run: Displays the timecode run mode.
All remaining clips or clip list playback time
Total number of clips recorded on disc
PDW-HD1500
Clip name
(comma), -, . (period), /, : (colon), ; (semicolon), <, =, >,
?, @, [, ], ^, _, {, |, }, ~
59.94i HD422-1080 50Mbps
Video format
System frequency
A Remaining disc recording capacity
B Rec Run/Free Run
C Timecode generator mode
D VITC
E Time data type
F Time data
G Recording mode indication
amount of recording capacity remaining on the disc.
The run mode is set with RUN MODE on page P5 TC
of the function menu (see page 51).
001/001 000:00
Number of current clip
8CH-24BIT
Audio format