Destination; Mailbox; Sending A Print Job To A Mailbox; Ecoprint - Kyocera TASKalfa 3501i User Manual

Basic

Destination

Mailbox

Sending a Print Job to a Mailbox

1
2
3
4

EcoPrint

Duplex Printing

5-5
Note: Source and Media type are separate items in the dialog box, but can
be combined using the Combine source and media type lists setting in
Device Settings > Compatibility Settings. If they are combined, Media type
is unavailable on the Basic tab, and media types can be selected in the
Source list.
This setting specifies which output tray is used for the print job output.
When an optional mailbox is installed and selected in the Device Settings tab,
you can send print jobs to any of seven mailbox trays.
You can send a print job to a mailbox tray.
In Basic > Destination, select Mailbox (face-down).
Click the Mailbox button.
In the dialog box, select a numbered mailbox from the list.
Click OK.
EcoPrint makes the entire image, text and graphics, appear lighter in the print
job. EcoPrint does not increase print speed. Click the icons to change between
on and off.
EcoPrint also appears in the Quick Print tab and in the Imaging tab. Changes
in Quick Print, Basic, or Imaging tabs are reflected in the other tabs.
Duplex printing is printing on both sides of each page. Click the icons to change
between Flip on long edge, Flip on short edge, and Off. If Off is selected,
then the printer prints on only one side of each page. The printer system
contains a duplex unit that turns the paper over to allow printing on the reverse
side. Flip on long edge or Flip on short edge must be selected to print on both
sides of the cover and insert pages.
Flip on long edge
Turn the long edge of the page to view the content.
Flip on short edge
Turn the short edge of the page to view the content.
User Guide