Custom Installing Utilities Only - Kyocera TASKalfa 3501i User Manual

13

Custom Installing Utilities Only

1
2
3
4
5
6
Printer Driver
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in
Device Settings > Administrator > General.
To exit the installer application click Finish.
A message may appear if there is a software installation failure. After clicking
Finish, retry the installation. If the same message appears again, contact your
system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
This section describes the custom installation of utilities without printing devices
or drivers,
Ensure that your printing device and computer are turned on and connected by
USB or network cable.
Click the Custom Install button.
Select a utility from the Utilities list, and click the arrow to move it to the
Products to Install list. If the most recent version of a utility is installed, the
utility is disabled in the list and shows the message, "Newer version already
installed."
KYOCERA Net Viewer
This utility lets you organize and monitor network printing device information
with many different features that are available, through default views, as well
as custom views that you can create.
Kyocera TWAIN Driver
This utility lets you scan TWAIN-supported applications.
File Management Utility
This utility classifies and distributes scanned files.
KYOCERA Net Direct Print
This utility makes PDF printing easier.
FONTS
This utility loads screen fonts that match the printer's fonts.
If you want to remove a product from the Products to Install list, select it and
click Remove at the bottom of the list box. To remove all products, click
Remove all.
Review your settings. At least one utility must be selected to enable the Install
button. If your settings are correct, click Install.
To exit the installer application click Finish.
A message may appear if there is a software installation failure. After clicking
Finish, retry the installation. If the same message appears again, contact your
system administrator.
Installation
1-6