Custom Install - Kyocera TASKalfa 3501i User Manual

Installation
7
8
9

Custom Install

1-3
Review your settings. At least one device and one product must be selected to
enable the Install button. If your settings are correct, click Install.
Note: In Windows 8, Windows XP, Windows Server 2003, or Windows Server
2012, if the Hardware Installation warning dialog box appears, click Continue
Anyway. In Windows 7, Windows Vista, or Windows Server 2008, if a warning
dialog box appears stating Windows can't verify the publisher of this driver
software, click Install this driver software anyway.
During the installation, you can expand or collapse the installation detail by
clicking the arrow. When the installation completes successfully, on the
Finished page you can select from the following options. These options only
appear after a printer driver installation.
Print a test page
Select this option to test the connection and operation of the printing device. If
the installation is successful, the Windows Printer Test Page, containing your
computer name and information on your printer driver and port settings, prints at
the newly installed printing device.
Enable Status Monitor
The Status Monitor shows system status messages on your computer screen
during printing tasks. The Status Monitor button appears on the Advanced
tab. Select the check box to enable it.
Device Settings
Select the Device Settings check box to open Device Settings where you can
choose installed options for your printing system. (The Device Settings check
box appears only in Windows XP with a network connection.)
Show Quick Print tab
The Quick Print tab lets you define basic print options into group profiles that
can be accessed easily. The Show Quick Print tab option also appears in
Device Settings > Administrator > General.
Click the plus sign icon to expand the list of options:
The Set Quick Print tab as default option makes the Quick Print tab the
first tab you see when you open the driver.
The Set Basic tab as default option makes the Basic tab the first tab you
see when you open the driver.
The Hide other tabs option makes the Quick Print tab the only tab in the
driver.
To exit the installer application click Finish.
A message may appear if there is a software installation failure. After clicking
Finish, retry the installation. If the same message appears again, contact your
system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
Custom Install applies to detailed device, driver, and utility installation for a
USB or network connection. The installer can discover devices that are turned
on, and connected by USB or network cable, or you can manually select your
own printing system model and port name.
User Guide