Rotate Copies; Tri-Fold; Printing With Tri-Fold - Kyocera TASKalfa 3501i User Manual

Finishing
Offsetting Jobs
1
2
3

Rotate Copies

Rotating Copies
1
2
3
4
5

Tri-Fold

Printing with Tri-Fold

1
2
7-2
You can offset, or shift each print job in the output tray.
In Finishing > Separation, click the Offset jobs icon.
Click OK to return to the Print dialog box.
Click OK to start printing.
Rotate copies stacks each copy of a print job at a right angle in the output tray.
If Collating by job is set to On at the printing system, the Rotate copies setting
in the driver is ignored.
This feature requires the following:
Paper size selections are limited to Letter, A4, 16K, or B5 (JIS).
The selected paper size must be loaded into two paper sources, one
horizontally and one vertically.
The print job must contain multiple pages and be specified to print multiple
copies.
You can stack each copy of a print job at right angles in the output tray.
In Basic > Destination, select an option that is not a finishing tray, for example:
Printer default.
Select a number of copies greater than 1.
In Finishing > Separation, click the Rotate copies icon.
Click OK to return to the Print dialog box.
Click OK to start printing.
The Tri-Fold feature lets you produce a document folded into thirds, like a
brochure or a pamphlet. Paper sizes A4 and Letter can be used. You can
choose to print on the inside or the outside of your document. You can select
the direction of the folds. You can also select the number of pages produced as
output.
This feature is available when a folding unit is installed.
In the Basic tab, under Destination, select Printer default or Folding tray.
In the Finishing tab, click the Tri-Fold icon.
User Guide