Printing Collated Documents; Orientation; Media Type - Kyocera TASKalfa 3501i User Manual

Printing Collated Documents

1
2
3
4

Orientation

Media Type

Printer Driver
processing involved in sending every copy from the computer to the printing
system.
With On selected, the driver prints the complete job set by set (123, 123). With
Off selected, it prints each page by set (111, 222). For example, with On
selected, three copies of a five-page document outputs as pages one through
five in succession, three times.
The printer driver automatically overrides the application's Collate setting and
uses the printer driver setting. You can use the application's Collate setting by
clearing the Ignore application collation check box in the Compatibility
Settings dialog box accessed from Device Settings.
If On (reverse order) is selected, the printed pages appear in reverse order
(321, 321). This option is available when Printer default is not selected under
Destination in the Basic tab.
When printing multiple copies of a multiple page document, the printer can
assemble the pages of each copy in numerical order.
In the Basic tab, select the Collate icons to change between on and off.
Type or select the number of complete sets of the print job in the Copies box.
The document page count must not exceed the printer tray capacity.
Click OK to return to the Print dialog box.
Click OK to start printing.
This setting specifies the paper orientation of the print job. Click the Portrait,
Landscape, Rotated portrait, or Rotated landscape icons. If a rotated option
is selected, the print job orientation is rotated 180 degrees.
Media type instructs the printer to search for the type of paper or media that is
requested by the application or the printer driver. The choices shown may
change depending on the selection in Source. The default is Unspecified and if
selected, the driver does not switch to another source tray if the selected tray is
empty. If Auto media selection is selected, then the printer searches for
another tray or cassette using the same paper size or media type. Automatic
selection of media types can be disabled in the PCL XL Settings dialog box.
You can display the custom media type names from the printing system. If any
names have been changed at the printing system, the new names appear in
place of default names. To display the printing system names, use the Auto
Configure feature in Device Settings.
Some media types, such as transparencies, labels, envelopes, and tab divider
sheets must be supplied from the MP tray. Ensure that the paper is properly
loaded by following the instructions outlined in the printing system's Operation
Guide.
Basic
5-4