Custom Finishing Edge Settings; Gutter; Creating A Gutter - Kyocera TASKalfa 3501i User Manual

Custom Finishing Edge Settings

Gutter

Creating a Gutter

1
2
3
Printer Driver
depend on Print size, Orientation, Booklet, and Multiple pages per sheet
selections.
In the overview area at the bottom, the page image shows a blue highlighted
strip to indicate the current selected Finishing edge with Staple and Punch
positions, if selected. When the Staple option is used, the Finishing edge
selection determines where staples are placed. Use this image to verify your
selections for Finishing edge and Staple.
The illustrations in the Custom Finishing Edge Settings dialog box help you
visualize the page alignments. Select the one setting that best illustrates the
edge of the mixed pages you want to align.
In the Position list, select Custom. In the Custom Finishing Edge Settings
dialog box, select one of the settings.
In the Custom Finishing Edge Settings dialog box:
The top two settings (A4/Letter) are for the smaller size paper in the mixed
page document.
The next two settings (A3/Legal/Ledger) are for the larger size paper in the
mixed page document.
Note that a change to one custom Finishing edge setting adjusts other
selections to make them compatible with the change.
Gutter increases the margins around your text and graphics on the left side and
at the top of the printed sheet. Gutter is often used for binding, hole punch or
stapling to make a print job easier to read. This creates a larger margin space
by shifting the printable area to the right, or down as much as one inch (25.4
mm).
Gutter width displays the unit of measurement in inches or millimeters. You
can change the Units setting in the User Settings dialog box, accessed from
Device Settings.
You can increase the margins on the left side and at the top of the printed sheet.
In the Finishing tab, click Gutter.
In the Gutter width options, type or select a value between 0.20 to 1.00 inches
(5.0 to 25.4 mm).
Short edge (top)
This selection modifies the outside margin on the top-edge of the page.
Long edge (left)
This selection modifies the outside margin on the left-side of the page.
Note: Availability of Gutter settings varies depending on Finishing edge
settings, and Orientation and Duplex settings in the Basic tab.
If text extends too close to the edge of the page, select Reduce image to fit.
The text appears slightly reduced and away from the edge of the page. If text
Finishing
7-5