Publishing
Inserting Backing Sheets Between Transparencies
1
2
3
4
5
6
Index Tab Dividers
Index Tab Dividers Options
9-7
only available when printing on transparencies supplied from the MP tray. You
can print the same content on the backing pages as on the transparencies.
Transparency interleaving cannot be used together with Cover mode, Page
insert, or Index tab dividers.
You can insert backing sheets between transparencies.
In Basic > Media type, select Transparency. If the Source and Media type
lists have been combined (by a selection in Device Settings > Compatibility
Settings), Media type does not appear. Instead, in the Source list select Auto
(Transparency).
In the Publishing tab, click the Transparency interleaving icon.
To print the transparency content on the inserted pages also, select the Print
onto backing check box.
In the Media for backing list, select the Media type of the backing sheet or the
Source paper cassette. When you choose the media type, a source cassette
matching that media type is automatically selected.
Click OK to return to the Print dialog box.
Click OK to start printing.
The printing system's operation panel prompts you to load transparencies into
the MP tray, and if necessary, load backing paper into the selected cassette.
Index tab dividers inserts tab divider sheets at specified points in a print job to
divide sections of a printed document. You can also print on the tabs. You can
use standard tab divider sheets for A4 and Letter paper, or you can create
custom tabs for those sizes. Tab divider sheets must be supplied from the MP
tray so that the tabs are on the edge opposite the feeding direction, and the
printing surface is down. The first tab is on the left side relative to the feed
direction.
Some options selected for Index tab dividers are automatically selected for
Publishing > Page insert. Similarly, Page insert selections appear in the Tab
Settings dialog box.
Tab text can be printed on only one side of the tabs, even if the document pages
are printed on both sides.
The Custom Media, Tab Settings, and Custom Tab dialog boxes display the
unit of measurement in inches or millimeters. You can change the Units setting
in the User Settings dialog box, accessed from Device Settings.
The following options are available for the Index tab dividers feature in the
Publishing tab.
Media
User Guide