Connecting The Power Cord - Fujitsu DL3750+/3850+ User Manual

CONNECTING THE POWER
CORD
User's Manual
Looking at the printer from the back with the cut sheet stand and back cover
removed, you can see the following parts of the printer:
Ejection cover
Paper guide
Back cover
Power
connector
Forms tractors
Printer components (rear)
Before you plug in the printer:
Make sure that the printer power is switched off. The side marked "1"
on the power switch should be raised.
Make sure that the power outlet is properly grounded.
Make sure that you use the power cord shipped with the printer. This
cord is designed to minimize radio frequency interference.
SETTING UP
Interface
connector
Paper select lever
2-11