Printing The Remaining Lines On A Page; Continuing Printing After Supplying Paper - Fujitsu DL3750+/3850+ User Manual

PRINTING
4-6

Printing the remaining lines on a page

This method is convenient to continue printing under the paper-out condition.
1. Press the ONLINE button. The printer returns to online mode, prints
or feeds one line, and the PAPER OUT indicator lights up again.
2. Repeat this procedure until the full page is printed. Line spacings,
however, may be uneven.
CAUTION
When using the cut sheet stand or when printing remaining lines, be careful
not to print on the platen. Printing on the platen may damage both the
platen and the print head.

Continuing printing after supplying paper

1. Install paper on the forms tractors or on the cut sheet stand.
2. To load the first sheet of paper, press the LOAD button. The PAPER
OUT indicator will turn off.
3. Press the ONLINE button to place the printer online. The printer
resumes printing.
NOTE
For continuous forms paper, the page where printing stopped and
the page where printing resumes may be incorrectly printed. In
this case, wait for the entire job to finish printing. Then reprint
the incorrect pages.
User's Manual