Fujitsu DL3750+/3850+ User Manual page 45

<<FUNCTION>>
SAVE&END MENU1 MENU2
V-ALMNT
<EMULATE> DPL24C+
User's Manual
3. Select the MENU1 function.
Locate the red cursor on the plastic print guide. Initially, this cursor
should be positioned under SAVE & END at the beginning of the
<<FUNCTION>> menu. Press the LOAD button repeatedly to
position the red cursor beneath MENU1, as shown below:
H ADJUST CONFIG
Press the MENU button to select MENU1 and print the following
<EMULATE> options:
XL24E ESC/P2
The currently selected emulation is indicated by a short underline. In
the figure shown above, the Fujitsu DPL24C PLUS emulation is
selected.
4. Select an emulation.
Press the LOAD button repeatedly to position the red cursor under the
required emulation. Press the MENU button to select the emulation
and print the next MENU1 item.
DEFAULT LIST SELF-TST
Press the LOAD button to position
to the red cursor.
SETTING UP
HEX-DUMP
2-25