Fujitsu DL3750+/3850+ User Manual page 109

User's Manual
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Items
<BUFFER>
(continued)
<INTRFCE>
PARALEL
SERIAL
USB
AUTO-2S
AUTO-4S
AUTO-6S
AUTO10S
AUTO15S
AUTO20S
Serial Interface or USB interface Items. The following <FORMAT> to
<DUPLEX> items are not printed when you select the PARALEL option for the
<INTRFCE> item. Be sure that the options selected on the printer are the same as
the options selected using your computer operating system or your software.
Refer to the documentation provided for your computer and software.
USING SETUP MODE
Description
NOTE:
• 0BYTE option is recommended
only for graphics application.
• With 128KB selected, the printer
cannot accept any download font
data.
Selects the type of the interface to the
computer.
Centronics parallel interface
RS-232C serial interface
USB interface
Auto interface selection mode
• Both interfaces are ready for
communication.
• Specify the timing regarding the
selected interface as being inactive.
To switch the interface to the optional
LAN interface, mount the LAN card with
the setup mode set to "AUTO-XS" or
"AUTOXXS" under "INTERFCE," which
in turn is under "HARDWRE" The
interface will automatically switch to the
optional LAN interface.
To switch the interface to something other
than the optional LAN interface, do either
of the following:
• To return the setup mode to
"INTERFCE" under "HARDWRE,"
remove the LAN card.
• To switch the interface to a fixed
interface, set PARALEL,USB with the
LAN card mounted, and the setup mode
set to "INTERFCE" under
"HARDWRE."
5-31