Fujitsu DL3750+/3850+ User Manual page 169

Approx. 8.5 mm (0.33 inches):
Resume printing is allowable
to single-part paper only and
selectable by setup mode.
User's Manual
102-266.7 mm (4-10.5 in)
for 80-column printer
102-420 mm (4-16.5 in)
for 136-column printer
102 mm
Print area
(4 inches)
or more
Perforation
Print area
Printing
resumable
Paper end
5.08-25.4 mm (0.2-1 in)
for 80-column printer
5.08-32 mm (0.2-1.3 in)
for 136-column printer
Print area for continuous forms
PRINTER AND PAPER SPECIFICATIONS
25.4 mm (1 inch)
25.4 mm (1 inch)
25.4 mm (1 inch)
Print head position when
paper end is detected,
selectable by setup mode.
Approx. 80 mm (3.2 inches)
for push-tractor feed
Approx. 35 mm (1.4 inches)
for pull-tractor feed
Print area may be off the
paper, depending on
5.08 mm or more
paper setting or width.
(0.2 inch or
May be
decreased to
4.23 mm
(1/6 inch).
However, line
spacing may be
uneven.
B-7