Fujitsu DL3750+/3850+ User Manual page 103

User's Manual
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and Epson
ESC/P2 emulations. The notes are defined at the end of the table.
MENU1 and
Options
MENU2 Items
<DC3-CDE> ENABLE
(*4)
DISABLE
<CR-CODE> CR ONLY
CR & LF
<LF-CODE> LF ONLY
(*3)
LF & CR
USING SETUP MODE
Description
Enables the DC1 and DC3 codes.
Any data received between DC3 and
the next DC1 is ignored.
Disables the DC1 and DC3 codes. These
codes are then ignored.
No line feed is added to a carriage
return.
A line feed is added to each carriage
return.
No carriage return is added to a line
feed.
A carriage return is added to each line
feed.
5-25