Fujitsu DL3750+/3850+ User Manual page 53

User's Manual
Table 3.1 Levers and Buttons Used for Paper Handling
Lever/Button Purpose
LF/FF Form feed
Line feed
Forward micro
feed
TEAR OFF Advance forms
for tear-off
LOAD Load/unload
Reverse micro
feed
MENU Save adjusted
load point
Paper Select paper
select path
lever *
Paper Adjust for
thickness paper thickness
lever or number of
copies
* The following graphics are engraved on the cover.
: Continuous forms
: Cut sheets
PAPER HANDLING
Action
Press and hold LF/FF to execute a form
feed. Continuous forms are fed forward
by one page. Single sheets are ejected.
Press LF/FF within three seconds to feed
paper forward by one line.
Press LF/FF and ONLINE to feed paper
forward by 1/180 inch.
Press TEAR OFF to advance the forms
perforation to the tear-off edge. Tear off
the forms, then press any button to
retract the remaining forms.
Press LOAD to load paper or to retract
continuous forms to the "park position".
Press LOAD and ONLINE to feed
paper backward by 1/180 inch.
Press MEMU and ONLINE to perma-
nently store the load position adjusted by
micro feeding
Move the paper select lever forward for
single sheets (cut sheet stand).
Move the paper select lever backward for
continuous forms.
Select the number corresponding to the
number of copies (including the original).
Vary the setting up or down (including A
to D) to optimize printing. Select D when
replacing ribbon or clearing a paper jam.
3-3