Overview Of Setup Mode - Fujitsu DL3750+/3850+ User Manual

USING SETUP MODE
OVERVIEW OF SETUP
MODE
<<FUNCTION>>
SAVE&END MENU1
V-ALMNT
Select Function
5-4
The initial printout contains a header, help menu, and <<FUNCTION>>
menu. The header tells you that the printer is offline and in setup mode. The
help menu provides a quick summary of how to use setup mode. The
<<FUNCTION>> menu lists all of the functions available to you in setup
mode. Note that the red cursor on the plastic print guide is initially positioned
below the SAVE & END function.
Setup mode can also be entered by turning off the printer, then turning the
printer back on while pressing the TEAR OFF and ONLINE buttons simulta-
neously until the printer beeps.
When you enter setup mode, the following <<FUNCTION>> menu is printed:
MENU2 HARDWRE ADJUST
Table 5.1 summarizes the purpose of each function.
Type Function
SAVE & END
MENU1 and
MENU2
HARDWRE
ADJUST
CONFIG
CONFIG DEFAULT LIST
Table 5.1 Setup Mode Functions
Exits setup mode and saves any changes made
while in setup mode.
Assigns print features to MENU1 and
MENU2 on the printer control panel.
Changes the printer hardware options.
Changes the print position adjustment options.
Changes the configuration options.
SELF-TST HEX-DUMP
Purpose
User's Manual