Deciding Which Options To Change - Fujitsu DL3750+/3850+ User Manual

USING SETUP MODE
DECIDING WHICH
OPTIONS TO CHANGE
5-12
The previous page shows a printout of the printer's factory default settings. In
this printout, options are listed by functional group:
• Menu 1 settings (MENU1 function)
• Menu 2 settings (MENU2 function)
• Hardware settings (HARDWRE function)
• Print position adjustment settings (ADJUST function)
• Configuration settings (CONFIG function)
Most selectable options only alter print features, such as the typestyle,
page format. However, some options must be selected correctly for the
printer to work properly with your hardware and software. For each
function, Table 5.2 lists items whose options must be selected correctly for
system and printer accessory compatibility.
Table 5.2 Required Options
Function Item
MENU1 EMULATE
MENU2 None
Option
The emulation selected on the printer
must be the same as the emulation
selected in your software. If you selected
an emulation when you set up the
printer (Chapter 2), you do not need to
change the EMULATE option unless you
want to change to a different emulation.
The emulation assigned to MENU1 is the
default when you turn the printer on.
See the section Changing MENU1 and
MENU2 Options later in this chapter.
If you use MENU2, the emulation selected
for MENU 2 must be the same as the
emulation selected in your software.
See the section Changing MENU1 and
MENU2 Options later in this chapter.
User's Manual