Assembling The Printer; Installing The Cut Sheet Stand - Fujitsu DL3750+/3850+ User Manual

SETTING UP

ASSEMBLING THE PRINTER

2-6
This section explains how to install the cut sheet stand and ribbon cartridge.

Installing the Cut Sheet Stand

The cut sheet stand enables smooth feeding of both single sheets and continu-
ous forms. Install the cut sheet stand as described below:
1. Referring to the following figure, locate the two grooved notches on
the top of the printer, behind the top cover. Note that each notch has a
front groove and a rear groove.
2. Locate the two mounting pins on each side of the cut sheet stand.
Mounting pins
Installing the cut sheet stand
Cut sheet stand
User's Manual