Removing The Display Cover; Replacing The Display Cover - Dell Precision M2400 Service Manual

1 M2.5 x 5-mm screw 2 latch hook assembly
3 display cover
Replacing the Latch Hook Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Angle the latch hook into the display cover.
2. Replace the M2.5 x 5-mm screw that secures the latch hook assembly to the display cover.
3. Replace the display bezel (see
4. Replace the display assembly (see
5. Replace the hinge covers (see
6. Replace the bottom of the base assembly (see
7. Follow the procedures in After Working on Your
Removing the Display Cover
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your
2. Remove the bottom of the base assembly (see
3. Remove the hinge covers (see
4. Remove the display assembly (see
5. Remove the display bezel (see
NOTE: It is not necessary to remove the brackets from the display panels in the next step.
6. Remove the display panel from the display cover (see
Panel and Brackets (E6400 and M2400)
Replacing the Display Cover
Replacing the Display Bezel (E6400 and M2400)
Replacing the Display Assembly (E6400 and M2400)
Replacing the Hinge Covers).
Replacing the Bottom of the Base
Computer.
Computer.
Removing the Bottom of the Base
Removing the Hinge Covers).
Removing the Display Assembly (E6400 and M2400)
Removing the Display Bezel (E6400 and M2400)
Removing the CCFL Display Panel and Brackets (E6400 and
or Removing the Display Panel and Brackets (E6400
or Replacing the Display Bezel (E6400
or Replacing the Display Assembly (E6400
Assembly).
Assembly).
or Removing the Display Assembly (E6400
or Removing the Display Bezel (E6400
ATG)).
ATG)).
ATG)).
ATG)).
ATG)).
M2400), Removing the LED Display