Back to Contents Page
I/O Card
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Removing the I/O Card
Replacing the I/O Card
Removing the I/O Card
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the procedures in
Before Working on Your
2. Remove the bottom of the base assembly (see
3. Remove the hard drive (see
4. Remove the modular drive (see
5. Remove the hinge covers (see
6. Remove the heatsink assembly (see
7. Remove the display assembly (see
8. Remove the LED cover (see
9. Remove the keyboard (see
10. Remove the right speaker grill (see
11. Remove the palm rest assembly (see
12. Remove the card cage (see
13. Remove the system board (see
system board.
14. Remove the modem (see
Removing the
15. Remove the RJ-11 modem connector (see
16. Remove the M2 x 3-mm screw from the I/O card.
17. Pull out the large plastic plug from the I/O card.
18. Remove the I/O card.
Computer.
Removing the Bottom of the Base
Removing the Hard
Drive).
Removing the Modular
Drive).
Removing the Hinge
Covers).
Removing the Processor Heatsink
Removing the Display Assembly (E6400 and M2400)
Removing the LED
Cover).
Removing the
Keyboard).
Removing the Right Speaker Grill/Fingerprint Reader
Removing the Palm Rest
Removing the Card
Cage).
Removing the System Board
Assembly). Do not remove the wireless mini-cards, memory modules, or processor from the
Modem).
Removing the RJ-11 Modem
Assembly).
Assembly).
or
Removing the Display Assembly (E6400
Assembly).
Assembly).
Connector).
ATG)).