Replacing The I/O Card - Dell Precision M2400 Service Manual

1 plastic plug
3 I/O card
Replacing the I/O Card
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Place the I/O card in the base assembly.
2. Replace the M2 x 3-mm screw to secure the I/O card to the base assembly.
3. Replace the plastic plug.
4. Replace the RJ-11 modem connector (see
5. Replace the modem (see Replacing the
6. Replace the system board (see
7. Replace the card cage (see
8. Replace the palm rest assembly (see
9. Replace the right speaker grill (see
10. Replace the keyboard (see
11. Replace the LED cover (see
12. Replace the display assembly (see
13. Replace the heatsink assembly (see
14. Replace the hinge covers (see
15. Replace the modular drive (see
16. Replace the hard drive (see
17. Replace the bottom of the base assembly (see
18. Follow the procedures in After Working on Your
2 M2 x 3-mm screw
Replacing the RJ-11 Modem
Modem).
Replacing the System Board Assembly).
Replacing the Card Cage).
Replacing the Palm Rest
Replacing the Right Speaker Grill/Fingerprint Reader
Replacing the Keyboard).
Replacing the LED Cover).
Replacing the Display Assembly (E6400 and M2400)
Replacing the Processor Heatsink
Replacing the Hinge Covers).
Replacing the Modular Drive).
Replacing the Hard Drive).
Replacing the Bottom of the Base
Computer.
Connector).
Assembly).
Assembly).
or Replacing the Display Assembly (E6400
Assembly).
Assembly).
ATG)).