Dell Precision M2400 Service Manual page 16

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
1. Holding the card cage at a 45-degree angle, attach the front of the card cage to the base assembly, then lower the card cage into place.
2. Replace the two M2 x 3 screws.
1 M2 x 3 screws (2) 2 base assembly
3 front of card cage
3. Replace the palm rest assembly
4. Replace the right speaker grill (see
5. Replace the keyboard (see
6. Replace the LED cover (see
7. Replace the display assembly (see
8. Replace the heatsink assembly (see
9. Replace the hinge covers (see
10. Replace the modular drive (see
11. Replace the bottom of the base assembly (see
12. Follow the procedures in After Working on Your
Back to Contents Page
(Replacing the Palm Rest Assembly).
Replacing the Right Speaker Grill/Fingerprint Reader
Replacing the Keyboard).
Replacing the LED Cover).
Replacing the Display Assembly (E6400 and M2400)
Replacing the Processor Heatsink
Replacing the Hinge Covers).
Replacing the Modular Drive).
Replacing the Bottom of the Base
Computer.
Assembly).
or Replacing the Display Assembly (E6400
Assembly).
Assembly).
ATG)).