1 M2.5 x 5-mm screw 2 release latch carrier
3 hard drive carrier
10. Remove the three M2.5 x 5-mm screws on the cover of the hard drive carrier.
11. Lift the cover up at an angle and remove.
1 cover
2 M2.5 x 5-mm screws (3)
3 hard drive carrier
12. Remove the four M2.5 x 5 screws from the hard drive bracket.
1 hard drive carrier 2 M2.5 x 5-mm screws (4)
3 hard drive
4 hard drive bracket
13. Slide the hard drive away from the connector, lift it up at an angle, and then disconnect it from the hard drive carrier.