Steps
1. Adhere the display eDP cable to the display back-cover and antenna assembly.
2. Connect the display eDP cable to the connector on the camera module.
Next steps
1. Install the
display
panel.
2. Install the
display
hinges.
3. Install the
display
bezel.
4. Install the
display hinge
5. Install the
display
assembly.
6. Install the
wireless
card.
7. Install the
base
cover.
8. Follow the procedure in
Display back-cover and antenna assembly
Removing the display back-cover and antenna assembly
CAUTION:
The information in this section is intended for authorized service technicians only.
104
Removing and installing Field Replaceable Units (FRUs)
caps.
After working inside your
computer.