Display Back-Cover And Antenna Assembly; Removing The Display Back-Cover And Antenna Assembly - Dell NOT21990 Owner's Manual

Steps
1. Adhere the display eDP cable to the display back-cover and antenna assembly.
2. Connect the display eDP cable to the connector on the camera module.
Next steps
1. Install the display panel.
2. Install the display hinges.
3. Install the display bezel.
4. Install the display hinge
5. Install the display assembly.
6. Install the wireless card.
7. Install the base cover.
8. Follow the procedure in

Display back-cover and antenna assembly

Removing the display back-cover and antenna assembly

CAUTION: The information in this section is intended for authorized service technicians only.
104 Removing and installing Field Replaceable Units (FRUs)
caps.
After working inside your computer.