Protocols Hierarchy; Routing Hierarchy; Services Hierarchy; Snmp Hierarchy - Dell PowerConnect J-8208 Release Note

set interfaces vlan unit 0 ppp-options
set interfaces vlan unit 0 radio-router

Protocols Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following CLI commands are not
supported. However, if you enter these commands in the CLI editor, they will appear
to succeed and will not display an error message.
set protocols bfd no-issu-timer-negotiation
set protocols bgp idle-after-switch-over
set protocols l2iw
set protocols bgp family inet flow
set protocols bgp family inet-vpn flow
set protocols igmp-snooping vlan all proxy

Routing Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following routing hierarchy CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they appear to succeed and do not display an error message.
set routing-instances p1 services
set routing-instances p1 multicast-snooping-options
set routing-instances p1 protocols amt
set routing-options bmp
set routing-options flow

Services Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following services hierarchy CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they appear to succeed and do not display an error message.
set services service-interface-pools

SNMP Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following SNMP hierarchy CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they appear to succeed and do not display an error message.
set snmp community 90 logical-system
Unsupported CLI Statements and Commands
23