Dell PowerConnect J-8208 Release Note page 21

set interfaces fe-0/0/2 fastether-options source-address-filter
set interfaces fe-0/0/2 fastether-options source-filtering
set interfaces ge-0/0/1 passive-monitor-mode
GRE Interface CLI
The following CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set interfaces gr-0/0/0 unit 0 ppp-options
set interfaces gr-0/0/0 unit 0 layer2-policer
IP Interface CLI
The following CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set interfaces ip-0/0/0 unit 0 layer2-policer
set interfaces ip-0/0/0 unit 0 ppp-options
set interfaces ip-0/0/0 unit 0 radio-router
LSQ Interface CLI
The following CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set interfaces lsq-0/0/0 unit 0 layer2-policer
set interfaces lsq-0/0/0 unit 0 family ccc
set interfaces lsq-0/0/0 unit 0 family tcc
set interfaces lsq-0/0/0 unit 0 family vpls
set interfaces lsq-0/0/0 unit 0 multipoint
set interfaces lsq-0/0/0 unit 0 point-to-point
set interfaces lsq-0/0/0 unit 0 radio-router
PT Interface CLI
The following CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set interfaces pt-1/0/0 gratuitous-arp-reply
set interfaces pt-1/0/0 link-mode
set interfaces pt-1/0/0 no-gratuitous-arp-reply
Unsupported CLI Statements and Commands
21