Command-Line Interface (Cli) - Dell PowerConnect J-8208 Release Note

Changes in Default Behavior and Syntax in Junos OS Release 10.3 for J-SRX Series Services Gateways

Command-Line Interface (CLI)

On AX411 Access Points, the possible completions available for the CLI command
set
wlan access-point < ap_name > radio < radio_num > radio-options channel number ?
have changed from previous implementations.
Now this CLI command displays the following possible completions:
Example 1:
user@host# set wlan access-point ap6 radio 1 radio-options channel number ?
Possible completions:
36 Channel 36
40 Channel 40
44 Channel 44
48 Channel 48
52 Channel 52
56 Channel 56
60 Channel 60
64 Channel 64
100 Channel 100
108 Channel 108
112 Channel 112
116 Channel 116
120 Channel 120
124 Channel 124
128 Channel 128
132 Channel 132
136 Channel 136
140 Channel 140
149 Channel 149
153 Channel 153
157 Channel 157
161 Channel 161
165 Channel 165
auto Automatically selected
Example 2:
user@host# set wlan access-point ap6 radio 2 radio-options channel number ?
1 Channel 1
2 Channel 2
3 Channel 3
4 Channel 4
5 Channel 5
6 Channel 6
7 Channel 7
8 Channel 8
9 Channel 9
10 Channel 10
11 Channel 11
12 Channel 12
9