Wlan; Vlan; Unsupported Cli Statements And Commands - Dell PowerConnect J-8208 Release Note

Unsupported CLI Statements and Commands

1450 bytes, the excess length is trimmed and the user is directed to the destination
URL that has been resized to 1450 bytes.

WLAN

While configuring the AX411 Access Point on your J-SRX Series devices, you must enter
the WLAN admin password using the
command. This command prompts for the password and the password entered is
stored in encrypted form.
NOTE:
Without wlan config option enabled, the AX411 Access Points will be
managed with the default password.
Changing the
subsystem
Points . You might have to power cycle the Access Points manually to
avoid this issue.
The J-SRX Series devices that are not using the AX411 Access Point can
optionally delete the
Accessing the AX411 Access Point through SSH is disabled by default. You can enable
the SSH access using the
command.
enable-ssh

VLAN

Native-vlan-id can be configured only when either
interface-mode trunk is configured. The commit error has been corrected, which was
previously indicating
vlan-tagging
This section lists unsupported CLI statements and commands.

Unsupported CLI Statements and Commands

set wlan admin-authentication password
wlan admin-authentication
option is disabled might result in mismanagement of Access
wlan config option.
set wlan access-point < name > external system services
mode instead of
password when the wlan
flexible-vlan-tagging mode or
mode.
flexible-vlan-tagging
17