Multilink; Poe; Security - Dell PowerConnect J-8208 Release Note

Release notes junos version 10.3
Hide thumbs Also See for PowerConnect J-8208:
Table of Contents

Advertisement

Junos 10.3 OS Release Notes
16
J-Web login page is updated with the new Juniper Networks logo and trademark.
The options to configure the Custom Attacks, Custom Attack Groups, and Dynamic
Attack Groups are disabled because they cannot be configured from J-Web.

Multilink

When data and LFI streams are present, we recommend the following configuration
to get less latency for LFI traffic and to avoid out of order transmission of data traffic:
Configure the following schedulers
set class-of-service schedulers S0 buffer-size temporal 20K
set class-of-service schedulers S0 priority low
set class-of-service schedulers S2 priority high
set class-of-service schedulers S3 priority high
Configure the following scheduler map
set class-of-service scheduler-maps lsqlink_map forwarding-class best-effort
scheduler S0
set class-of-service scheduler-maps lsqlink_map forwarding-class
assured-forwarding scheduler S2
set class-of-service scheduler-maps lsqlink_map forwarding-class network-control
scheduler S3
Attach scheduler map to all member links
set class-of-service interfaces t1-2/0/0 unit 0 scheduler-map lsqlink_map
Even after this configuration, if Out-of-range sequence number drops are observed on
reassembly side, please increase drop-timeout of the bundle to 200ms

PoE

On J-SRX210 PoE devices, SDK packages might not work.

Security

Any change in the Unified Access Control's (UAC) contact interval and timeout values
in the J-SRX Series device will be effective only after the next reconnection of the J-SRX
Series device with the Infranet Controller.
The maximum size of a redirect payload is 1450 bytes. The size of the redirect URL is
restricted to 1407 bytes (excluding a few HTTP headers). If a user accesses a destination
URL that is larger than 1407 bytes, the Infranet Controller authenticates the payload,
the exact length of the redirect URL is calculated, and the destination URL is trimmed
such that it can fit into the redirect URL. The destination URL can be fewer than 1407
bytes based on what else is present in the redirect URL, for example, policy ID. The
destination URL in the default redirect URL is trimmed such that the redirect packet
payload size is limited to 1450 bytes, and if the length of the payload is larger than

Advertisement

Table of Contents
loading

Table of Contents