Layer 2 And Layer 3 Protocols; Switches; Access Control And Port Security; Bridging, Vlans, And Spanning Trees - Dell PowerConnect J-8208 Release Note

Related
Documentation
Outstanding Issues in Junos OS Release 10.3 for J-EX Series Ethernet Switches
Outstanding Issues in Junos OS Release 10.3 for J-EX Series Ethernet Switches
NOTE: For both J-SRX and J-EX devices, the browser and the network must
support receiving and processing HTTP 1.1 GZIP compressed data.

Layer 2 and Layer 3 Protocols

On J-EX8200 switches, ensure that the
than 500 milliseconds.
New Features in Junos OS Release 10.3 for J-EX Series Ethernet switches on page 52
Changes in Default Behavior and Syntax in Junos OS Release 10.3 for J-EX Series
Ethernet switches on page 54
Outstanding Issues in Junos OS Release 10.3 for J-EX Series Ethernet switches on
page 57
Resolved Issues in Junos OS Release 10.3 for J-EX Series Ethernet switches on page 60
Errata in Documentation for Junos OS Release 10.3 for J-EX Series Ethernet switches
on page 63
The following are outstanding issues in Junos OS Release 10.3R2 for J-EX Series Ethernet
switches. The identifier following the description is the tracking number in our bug
database.

Access Control and Port Security

On J-EX Series Ethernet switches, when you enable and disable IPv6 on the
management interface (
show lldp local-information
On J-EX4200 switches, EAP-TTLS authentication with a server-reject-vlan configuration
might not work. [PR/506918]

Bridging, VLANs, and Spanning Trees

If you modify MSTP configuration and VLAN membership for an interface, those changes
can result in an inconsistent MSTP membership for that interface. As a workaround,
restart the Ethernet switching process (eswd) after committing the configuration.
[PR/525507]

Infrastructure

On J-EX8200 switches, when IGMP snooping is enabled on an interface, the IPv6
multicast Layer 2 control frame is not forwarded to other interfaces in the same VLAN.
[PR/456700]
If you configure a large number of VLANS and aggregated Ethernet interfaces and
commit the configuration, the forwarding process (
bfd-liveness-detection
me0 ), the management information is not displayed in the
command output. [PR/503955]
timers are set no lower
) utilization stays at 80 percent
pfem
57