Application Layer Gateways (Algs); Appsecure - Dell PowerConnect J-8208 Release Note

Changes in Default Behavior and Syntax in Junos OS Release 10.3 for J-SRX Series Services Gateways

Application Layer Gateways (ALGs)

The
show security alg msrpc object-id-map
option to permit the output to be restricted to a particular node or to query the entire
cluster. The show security alg msrpc object-id-map node
<node-id | all | local | primary>

AppSecure

When you create custom application or nested application signatures for Junos OS
application identification, the order value must be unique among all predefined and
custom application signatures. The order value determines the application matching
priority of the application signature.
NOTE: The order value range for predefined signatures is 1 through 32,767.
We recommend that you use an order range higher than 32,767 for custom
signatures.
The order value is set with the
application-name signature order
values by entering the
show services application-identification | display set | match order
command. You will need to change the order number of the custom signature if it
conflicts with another application signature.
The output of the
show services application-identification application-system-cache
command has been changed. The new output includes the cache statuses and the
timeout value for maintaining mapping details for each application as shown in the
following sample:
user@host> show services application-identification application-system-cache
Application System Cache Configurations:
application-cache: on
nested-application-cache: on
cache-entry-timeout: 3600 seconds
pic: 2/0
Vsys-ID IP address
0 5.0.0.1
0 7.0.0.1
CLI command has a chassis cluster node
.
set services application-identification application
command. You can also view all signature order
Port Protocol
80 TCP
80 TCP
CLI command options are
Application
HTTP
HTTP:FACEBOOK
7