Related
Documentation
Issues in Junos OS Release 10.3 for J-SRX Series Services Gateways
Encapsulations (Ether CCC, VLAN CCC, VPLS, PPPoE, and so on) on VLAN interfaces
CLNS
PIM
DVMRP
VLAN interface MAC change
Gratuitous ARP
Change VLAN-Id for VLAN interface
VLAN
On J-SRX100, J-SRX210, and J-SRX240 devices, the IRB (VLAN) interface cannot be
used as the underlying interface for Point-to-Point Protocol over Ethernet (PPPoE).
VPNs
On J-SRX100, J-SRX210, and J-SRX240 devices, while configuring dynamic VPN using
PULSE client, when you select the authentication-algorithm as sha-256 in IKE proposal,
IPsec session might not get established.
WLAN
The following are the maximum numbers of access points that can be configured and
managed from J-SRX Series devices:
J-SRX210—4 access points
J-SRX240—8 access points
NOTE: The number of licensed access points can exceed the maximum
number of supported access points. However, you can only configure and
manage the maximum number of access points.
New Features in Junos OS Release 10.3 for J-SRX Series Services Gateways on page 4
Issues in Junos OS Release 10.3 for J-SRX Series Services Gateways on page 29
Errata and Changes in Documentation for Junos OS Release 10.3 for J-SRX Series
Services Gateways on page 42
Outstanding Issues In Junos OS Release 10.3 for J-SRX Series Services
Gateways on page 30
Resolved Issues in Junos OS Release 10.3 for J-SRX Series Services Gateways on page 39
Issues in Junos OS Release 10.3 for J-SRX Series Services Gateways
29