Dell PowerConnect J-8208 Release Note page 44

Release notes junos version 10.3
Hide thumbs Also See for PowerConnect J-8208:
Table of Contents

Advertisement

Junos 10.3 OS Release Notes
44
J-SRX100, J-SRX210, and J-SRX240 support the Link aggregation in chassis cluster
mode feature.
The Feature Support Reference for SRX Series and J Series Devices on page 31, Table 27
for MPLS Support erroneously states that only J-SRX240 supports the Connectionless
Network Service (CLNS) feature.
The correct information for this section is:
J-SRX100, J-SRX210, and J-SRX240 support the Connectionless Network Service
(CLNS) feature.
J-Web
J-Web security package update Help page—The J-Web Security Package Update
Help page does not contain information about download status.
J-Web pages for stateless firewall filters—There is no documentation describing the
J-Web pages for stateless firewall filters. To find these pages in J-Web, go to
Configure>Security>Firewall Filters, then select IPv4 Firewall Filters or IPv6 Firewall
Filters. After configuring filters, select Assign to Interfaces to assign your configured
filters to interfaces.
J-Web Configuration Instructions
some of the J-Web configuration example instructions in the administration and
configuration guides became obsolete and thus were removed. For examples that are
missing J-Web instructions, use the provided CLI instructions.
Security Configuration Guide
ALG configuration examples in the Junos OS Security Configuration Guide incorrectly
show policy-based NAT configurations. NAT configurations are now rule-based.
The "Verifying the Policy Compilation and Load Status" section of the Junos OS Security
Configuration Guide has a missing empty/new line before the
in the second sample output.
When specifying a forwarding target after authentication on a captive portal, use the
option followed by either the
?target=
variable forwards authenticated users to the protected resource they
%dest-url%
originally specified. A URL forwards authenticated users to a specific site.
Note that when entering a URL with the
characters for any special characters in the URL. Use the following escape characters
for these common special characters:
Replace
with
:
%3A
Replace
with
/
%2F
Replace
-
with
%2D
Replace
with
.
%2E
In the section "Example: Configuring a Redirect URL for Captive Portal (CLI)" in the
Junos OS Security Configuration Guide, the procedure description states that, after
authentication, users will be forwarded to the specified URL. Step 2 of the configuration
— Because of ongoing J-Web interface enhancements,
variable or a specific URL. The
%dest-url%
option, you must substitute escape
?target=
heading,
IDPD Trace file

Advertisement

Table of Contents
loading

Table of Contents