Accounting-Options Hierarchy; Ax411 Access Point Hierarchy; Chassis Hierarchy; Class-Of-Service Hierarchy - Dell PowerConnect J-8208 Release Note

Release notes junos version 10.3
Hide thumbs Also See for PowerConnect J-8208:
Table of Contents

Advertisement

Junos 10.3 OS Release Notes
18

Accounting-Options Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the
statements in the
destination-class
supported.

AX411 Access Point Hierarchy

On J-SRX100 devices, there are CLI commands for wireless LAN configurations related
to the AX411 Access Point. However, at this time the J-SRX100 devices do not support
the AX411 Access Point.

Chassis Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following chassis hierarchy CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they appear to succeed and do not display an error message.
set chassis craft-lockout
set chassis routing-engine on-disk-failure

Class-of-Service Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following class-of-service hierarchy
CLI commands are not supported. However, if you enter these commands in the CLI
editor, they appear to succeed and do not display an error message.
set class-of-service classifiers ieee-802.1ad
set class-of-service interfaces interface-name unit 0 adaptive-shaper

Ethernet-Switching Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following Ethernet-switching
hierarchy CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set ethernet-switching-options bpdu-block disable-timeout
set ethernet-switching-options bpdu-block interface
set ethernet-switching-options mac-notification
set ethernet-switching-options voip interface access-ports
set ethernet-switching-options voip interface ge-0/0/0.0 forwarding-class

Firewall Hierarchy

On J-SRX100, J-SRX210, and J-SRX240 devices, the following Firewall hierarchy CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they appear to succeed and do not display an error message.
accounting
hierarchy level are not
[accounting-options]
,
, and
source-class

Advertisement

Table of Contents
loading

Table of Contents